Showing 1–16 of 68 results
-
English Wheel 28In Throa T Depth With Stand
$969.99 Read moreEnglish Wheel – 28 in Throat Depth – 60 in Tall – Floor Stand Included – Anvil Set Included – Steel – Blue / Gray – Each
-
6-1/2in Cast Iron Bench Vise
$369.99 Read moreVise – Bench – 6-1/2 in Jaw – Handle / Pin Included – Bench Mounted – Iron – Blue Paint – Kit
-
4In Cast Iron Bench Vise
$89.99 Read moreVise – Bench – 4 in Jaw – Handle / Pin Included – Bench Mounted – Iron – Blue Paint – Kit
-
Roll Bending Machine
$539.99 Add to cartTubing Bender – Bolt-On Mount – Hand Crank – 0.080 in Thick Tubing – 1-1/2 in Die Included – Steel – White Paint – Each
-
Roll Bending Machine
$399.99 Read moreTubing Bender – Bolt-On Mount – Hand Crank – 1/4 to 1-3/4 in Wide Solid Stock – 1/4 in to 1-1/2 in Diameter Square Tube – Steel – White Paint – Each
-
Super Duty Shrinker/Stre tcher 3in Throat 18 Ga.
$354.99 Read moreMetal Shrinker and Stretcher – Foot Pedal Operated – 3-1/2 in Deep – 18 Gauge Maximum – Blue / Gray – Kit
-
Entry Level Shrinker/ Stretcher
$239.99 Add to cartMetal Shrinker and Stretcher – Vice / Bench Mount – 2 Bases / 2 Handles / 2 Jaws – 18 Gauge Maximum – Blue / Gray – Kit
-
Elite Slip Roll 50in 16 Gauge Capacity
$2,614.99 Read moreSheet Metal Roller – Elite – 16 Gauge Maximum – 50 in Wide – Floor Stand Included – Steel – Blue / Gray Paint – Each
-
40In Slip Roll 2in Dia. Rolls 20 Gauge Capacity
$853.99 Read moreSheet Metal Roller – 20 Gauge Maximum – 40 in Wide – 2 in Rollers – Steel – Blue / Gray Paint – Each
-
24in Slip Roll 1-1/2in D ia. Rolls 20 Gauge Cap.
$524.99 Read moreSheet Metal Roller – 20 Gauge Maximum – 24 in Wide – 1-1/2 in Rollers – Steel – Blue / Gray Paint – Each
-
12In Slip Roll 1-1/4in D ia. Rolls 20 Gauge Cap.
$229.99 Read moreSheet Metal Roller – 20 Gauge Maximum – 12 in Wide – 1-1/4 in Rollers – Steel – Blue / Gray Paint – Each
-
12In Slip Roll 1in Dia. Rolls 20 Gauge Capacity
$259.99 Add to cartSheet Metal Roller – 20 Gauge Maximum – 12 in Wide – 1 in Rollers – Steel – Blue / Gray Paint – Each
-
Sheet Metal Thickness Ga uge
$16.99 Add to cartSheet Metal Thickness Gauge – 0-30 Gauge – 0.0125-0.3125 in – Engraved Scale – Steel – Natural – Each
-
Planishing Hammer 19-5/8 in Throat Depth
$389.99 Read morePlanishing Hammer – 19-5-/8 in Depth – 4 CFM at 50-100 psi Air Flow Rate – 3 Anvils / Floor Stand Included – Steel – Blue / Gray – Kit
-
Tube & Pipe Notcher 3/4in to 3in
$328.99 Add to cartTubing Notcher – Hole Saw – 3/4 to 3 in OD Tubing – Up to 50 Degrees Adjustment – 1/2 in Hand Drill – Steel – Natural – Kit
-
Throatless Rotary Shear
$299.99 Add to cartThroatless Shear – Rotary Blade – Cast Iron – Gray Paint – 1/8 in Steel Maximum – Each