Description
Power Gear Slide Out Motor 1010000010 Lippert 368417
Power Gear Quick Reference Guide
Slide Out Motor Identification Guide
PRODUCT DESCRIPTION
New, permanent magnet, parallel shaft gear-motor. Cast aluminum gear housing and motor end cap with steel motor frame. 12 VDC electro-mechanical brake on rear of motor with manual release lever. CURRENTLY SUPPLIED WITHOUT BOOT.
Power Gear Slide Out Motor 1010000010
Maxi-Torque, Dual Shaft, without Pin, Base Motor Number: 1510000006
Also known under Lippert part number: 368417
The Lippert Above Floor Slide-out System is a rack and pinion style slide system. Utilizing a bi-directional electric motor to actuate the drive shaft, the slide-out room is extended and retracted from the same source. The actuator has a built-in automatic braking feature. The Lippert Above Floor Slide-out is designed as a negative or positive ground system.
SPECIFICATIONS
- Speed 6 RPM @ 850 in-lbs, 25 Amps
- 10 RPM @ 400 in-lbs, 13 Amps
- 12 RPM (no load)
- Voltage 12 DC
- Torque 850 in-lbs
- Holding Torque 500 in-lbs.
- Rotation Reversible
- Duty Intermittent
- Enclosure TENV
- Power Gear Slide Out Motor 1010000010 Lippert 368417
- Mount Four bolt face mount on 3.38″ x 3.38″centers
- Dual Shafts 3/4″ diam. x 1-1/4″ with 1/4″ crosshole (no keyway)
- Size 9-1/4″ x 3-7/8″ x 6-1/4″
- Compatibility : Kwikee Slide Out Base Motor Numbers 1510000006
Voltage Rating : 12 Volt
Shaft Type : Dual Output Shaft
Drive Type : Center Drive
Mounting Location : Mounts Between The Slide Out Rails
CROSS REFERENCES: K01469-B300, K01469B300, 130-1235, 130-1204c, K01531A300, 1265E300, 1510000006, 130-1164, 130-1187, 13-1109, 130-1219, 443174, 520819, 522967, 523529, 521976, 13-1133, 13-1119, 523900, 523013, 523529, 524094, 524327, 524377, 524411, 524417, 523931, 524246, 520819, 522967, 523823 1010000010, 523983, 522176 (check specs) 386322 (verify bolt pattern) 521292, 521748, 523046, 523387,368417, 522756, 524361, 524667, 523143, 386480