Description
Transfer Switch DPDT 110VDC Relay 102084
Replaced by PD110902
Or 21082-84
or 95-LPT736760
Ano of the following can be used.
1-102084 or PD110902 use 95-2108084 or 95-LPT736760 or 21082-84
Contact points are rated at 30 amps per pole 110 VDC coil DPDT (double pole, double throw) relay. Used in all 30 Amp Parallax ATS, Todd TS-30, and Progressive Dynamics 700 series converter transfer switches.
The coil used to pull down the contact points of this relay is rated 110 VDC, usually you will read about 110 to 160 VDC the coil itself can be checked by ohming it out. Anywhere between 5000 to 6000 ohms on the ohm meter is good, outside that range, REPLACE THE RELAY.
