Description
Intellitec Water Pump Control (Switch To Ground) 00-10027-000
00-10027-000-Water Pump Control Brochure
The Water Pump Control can be mounted right next to the Water Pump. A single low current
signal wire can be run through the RV. Any momentary ground pulse on this wire toggles the
Water Pump On & Off. Any momentary switch wired from this signal wire to a local ground,
can be pressed to toggle the Water Pump On & Off. This way the Pump can be turned on in
one location, and then turned off in another. The positive side of the Water Pump is
connected directly to the + side of the Coach Battery through a fuse. The Water Pump
Control uses Solid State switching to connect the negative side of the Water Pump to Battery
Ground and run the Pump when requested.
Key Features:
1. Easy installation to control Water Pump from multiple locations.
2. Waterproof, fully potted module.
3. Solid State Switching.
4. 00-10027-000 has 10 Amps continuous current rating.
5. Operating Voltage Range of 9.0Vdc to 16.0Vdc.
6. Ambient Temperature Range of -40 C to +85 C.
7. All connections made with 1/4″ Faston Quick Connect terminals.
8. 2.990″ Wide X 1.550″ Deep X .745″ Tall (.780″ to top of terminals)
00-10027-100 has 15 Amps continuous current rating.
Intellitec Products, LLC is a vertically integrated electronics manufacturing company. Partnering with Intellitec RVpartsexpress is your preferred provider for all the Intellitec product needs. Established in 1976, we served the specialty vehicle and marine markets on a global scale. Formerly owned by General Dynamics, Intellitec Products, LLC was acquired by the NSI Group of Michigan in 2004. In 2012 our company was relocated to its current, state of the art, 35,000 sq. ft. manufacturing and global headquarters in DeLand, FL. RVPartsexpress and Intellitec can provide you with all the electronic products that you need for your RV, Camper or Motor Home. We continue to design, develop and manufacture engineered solutions to meet the current and future needs of global industry leaders. Our products are proudly made in the United States and available to customers worldwide.
Intellitec designs and manufactures electronic and electrical controls and monitoring systems based on proven platforms of products. With over 40 years of field experience, we are the global leader in battery management, motor and lighting controls and multiplexing systems. Intellitec also provides contract manufacturing services for low and high volume printed circuit boards, harnesses and assemblies. Our products are used for power distribution, switching, monitoring, and controlling electrical systems in a wide range of challenging applications including: Recreational Vehicles Transportation (Bus and Limo) Emergency Service Vehicles Trucks and Specialty Vehicles Military and Marine Vehicles
