Description
ESCO 50 Amp Transfer Switch #LPT50MRD
Replaces Todd Engineering part #TS50
Designed to provide automotive selection between two sources of power, such as a shore cord and a generator. The LPT50MRD can switch 60 amps 120VAC or 30 amps 240VAC is provided with generator start up delay. Designed with DC coiled relays to reduce hum and terminal blocks simplify wire connections. The advantage of the LPT50MRD is that it can handle both 120VAC and 240VAC. Most applications only use 120VAC but when the need for 240VAC arises the LPT50MRD is the correct transfer switch. When replacing the Todd Engineering TS 50 the ESCO 50 Amp Transfer Switch #LPT50MRD is a quick and easy match.
Similar to LPT30, designed to automatically switch between two sources such as shore power to generator. Transfers 2 hot poles and neutral as same time. 30 second time delay to allow generator to get up to speed. Has a mechanical interlock and a side switch to prevent shoreline from energizing while the generator is providing power. Designed with DC coiled relays to reduce hum. Has a micro switch on the neutral relay to insure neutral lines are engaged before hot lines. Same as LPT50BRD but with DC powered coil and does not have a terminal strip, (connects with wire nuts). The LPT50MRD is designed with DC coiled relays to reduce hum.
Maximum Service:
Designed for use in a circuit capable of delivering not more than 5000A rms symmetrical, 300V maximum, when protected by a circuit breaker rated not more than 50 amps. The system load shall not exceed 40A inductive, 50A resistive or a combination there of.
Gen actuated, Two 110VDC coiled relays, 30 amp per pole
- 2-hot 30 amp max
- 2-neutral 30 amp max
- 1-hot 60 amp max
- 1-neutral 60 amp max
Time Delay board Time Delay TD 30 #LPT30-TIME
Warranty Terms: 1 Year