Description
Intellitec PMC Warning Light Adaptor 00-00644-806
6 Warning Light Direct Plug-In Adapter
PMC Warning Light Adapters 806 & 816 are members of Intellitec’s Programmable Multiplex Control family.
They work in combination with the PMC CPU and other standard, semi-custom or custom I/O modules.
ITT warning lamps plug directly into the 806 or 816
Adapter, eliminating the need for a harness or separate wiring to each lamp. The lamps are controlled by the
central PMC CPU via the two wire PMC communications link. The third wire provides power to the lamps.
The 3 wire PMC connection is made with an AMP Mate-N-Lok connector to reduce installation time and
errors. The six warning lights require only 3 wires vs. conventional wiring scheme needing as many as 12.
Intellitec can also
design and manufacture custom lamp or switch panels to fit your specific requirement.
The approximate module dimensions are 3.00″ wide X 1.90″ tall X 2.30″ deep (75.6mm X 48.3mm X
58.5mm).
(also know as SWF, Britax, or Sprague, not provided)
Contact Intellitec if adapters are needed for other lamp manufacturers or other layouts.
The module should be installed in a protected environment inside of the vehicle