Description
Intellitec Single Wiper Motor Control 01-00141-000
Intellitec’s family of windshield wiper controllers, offer a single knob to control: SPEED, INTERMITTENT TIME DELAY, and WASHER PUMP. This controller is for a single motor system, and will work with most wiper motors. The single knob takes a minimum of instrument panel space while providing a switch that is easy to understand and operate. In addition, the same switch can be used with single motor or dual motor controllers, so that the dash need not be modified to change between a single or dual motor system. Units are splash resistant and will work with most wiper motors.
Electronic Box:
- Dual box: 5″ wide, 7″ long, 1.25″ high
- Single Box: 3.75″wide, 6.625″ long, 2″ high
| Specifications: | |
| Operating Voltage | 11 to 16 Volts DC |
| Time Delay | Maximum 20 seconds Minimum 1 second |
| Motors | 2 speed with or without dynamic park |
| Connectors | 1/4″ quick connect |
| Wash | 3 low speed wipe cycles after release |
| Function Switch | 3/8″ diameter mounting hole (hardware included), 1/4″ diameter shaft, 300° rotation, push stroke 3/32″ |
| Temperature | -40°C to 85°C -40°F to 185°F |
Warranty Terms: 1 Year
