Power Gear Slide out control module #140-1130
Lippert Part number is #368859
Replaces part# 14-1096 you have to rewire the wall switch to be 12VDC switched instead of ground switched.
- Positive activated to the switch.
- Wiring Harness is part# 171-141138
- If using 15 AMP Circuit Breaker part# 171-141090, use 20 AMP Slo Blo Fuse part# 171-141124
- If using 20 AMP Circuit Breaker part# 171-141089, use 25 AMP Slo Blo Fuse part# 171-141134
Fleetwood part number #246063
Lippert Part number is 368859
This circuit board replaces Power Gear circuit board model numbers 14-1130, 14-1098 and 14-1086. The same fuse and breaker that is on the old board may be used on the new 140-1130.
The 140-1130 controller will need the center wire on the wall switch to be a 12VDC (positive trigger) which on some models of controllers such as the 14-1098 are ground trigger. You may also elect to include a new 326 series 25 amp slow blow fuse (P# 14-1134) or 20 amp slow blow fuse (P# 14-1124) and or 20 amp breaker (P#14-1089) or 15 amp breaker (P#14-1090) from the option box above.