Description
ESCO 50 Amp Transfer Switch W/Lugs LPT50BRD
Replaces the LPT50CA from Lyght Power
Replaces the PS245L, PS245S and PS250 from Todd Engineering.
Automatically switches from shore power to generator. Transfers 2 hot poles and neutral as same time. 30 second time delay to allow generator to get up to speed. Has a mechanical interlock and a side switch to prevent shoreline from energizing while the generator is providing power. Designed with DC coiled relays to reduce hum. Has a micro switch on the neutral relay to insure neutral lines are engaged before hot lines. Includes a terminal strip to connect to.
- Automatically switches from power cord to generator.
- Heavy duty relay assembly will handle 50 amp power cord and up to 12KW generator.
- Transfers two hot poles and neutral simultaneously.
- ESCO 50 Amp Transfer Switch W/Lugs LPT50BRD
- Generator start up delay is provided to allow the generator to get up to speed.
- Utilizes a micro switch on the neutral relay to ensure neutral lines are engaged before the hot lines.
- Designed with DC coiled relays to reduce hum, and terminal blocks to simplify wire connections.
- Quick and easy installation.
- Enclosure Size 8.5 X 8.5 X 4.5
- Designed for OEM and aftermarket applications.
- Installation and Trouble shooting Manual
- LPT50BRD Wiring Diagram
- Time Delay Board
Intended for usage as an electrical transfer switch to automatically switch multiple sources (from one to another), i.e. switching from shoreline to generator power.
Primarily designed for installation in conjunction with a generator having a rated output of not larger than 12KW, an external power cord having a rated output of not larger than 240VAC, 2 poles 50A per pole, 1PH, 60Hz.
| Specifications: | |
| Contactors | General Purpose DPDT 50 amp Relays |
| Coil | 110 VDC 2 watts |
| Time Delay | Custom time delay, 30 seconds nominal can bypass for instant switching. |
| Knockouts | Assorted |
Will not work Winnabago with Energy Management Unit.
The ESCO 50 Amp Transfer Switch W/Lugs LPT50BRD is a field repairable switch. Warranty covers defective parts only. Do not return the complete switch unless instructed to do so. The tools needed are straight blade & Phillips screwdrivers, flexible nut driver and AC/DC (Volt, Ohm) meter. These tools are available at most hardware stores.
The LPT50BRD Automatic Transfer Switch is intended for usage as an electrical transfer switch to automatically switch multiple sources from one to another. Automatically switches from power cord to generator and includes a
Heavy duty relay assembly that will handle a 50 amp power cord and up to 12KW generator. The LPT50BRD transfers two hot poles and neutral simultaneously. The unit offers generator start up delay to provided time for the generator to get up to speed. The LPT50BRD is designed with DC coiled relays to reduce hum, and terminal blocks to simplify wire connections. The transfer switch is quick and easy to install.
Warranty Terms: 1 Year
