Description
Intellitec Automatic Energy Select Switch 00-00714-000
Intellitec’s Automatic Energy Select Switch (AESS) is
designed to be used in RVs to share the power available
from a single circuit breaker between two large loads. The
AESS applies power to both appliances until the primary load
is turned on. It then removes power from the secondary load
to prevent the circuit breaker from being overloaded. This
function is particularly useful for sharing power between the
microwave oven and another “sheddable” or postpone-able
appliance, such as the washer/dryer, or water heater.
Typically, this function has performed with selector switches,
forcing the owner to manually switch between the two
appliances.
The selecting function is particularly useful when the
microwave oven is the principal load. Power is always
available to it, assuring that the customer can use the
microwave whenever required and it’s internal clock remains
operating. While the microwave is in use, the function of the
secondary load is postponed until the microwave is finished.
How it works
The Automatic Energy Select Switch controls power to
two appliance loads. One appliance on the primary load is
connected to the primary output and a shed-able appliance
is connected to the secondary output. The output to the
secondary load is carried through a relay.
When the shore cord is first plugged in, power flows through
the AESS to the primary load and the relay is quickly closed,
supplying power to the secondary load. When the primary
load is turned off for more than 45 seconds, the power is
re-applied to it.
Features
• Allows two 20 Amp loads to operate from a
single 20 Amp breaker
• Automatically switches between the two loads as
the demand requires
• Meets NECsection 551-42(c) for adding breakers
over the maximum limit of five and allowing
for more than two, thermostatically controlled
appliances.
Intellitec Automatic Energy Select Switch 00-00714-000
• Minimizes circuit breaker tripping.
• Eliminates manual appliance select switches.
