Description
Progressive Dynamics 90 Amp Converter W/ ACDC Panel PD4590AV
90-Amp Inteli-Power Converter/Charger and AC/DC Distribution Panel
Now PD4590AV
Panel Dimensions: 11.85”W x 14.125”H x 7.80”D
Cutout Size: 10.125”W x 13.25”H
The Ultimate All-In-One 240V, 50 Amp AC/DC Distribution Panel with built-in Charge Wizard® – Now Available in 75 Amp!
Inteli-Power 4500 Series models can recharge the battery to 90% in 3-6 hours using our patented Charge Wizard technology:
PD4590 Converter Input: 105-130VAC 50/60HZ 1550 Watts Output: 13.6-14.6 VDC 90 Amps
Installation and Operation Guide
BOOST Mode 14.4 Volts – Rapidly brings RV battery up to 90% of full charge.
NORMAL Mode 13.6 Volts – Safely completes the charge.
STORAGE Mode 13.2 Volts – Maintains charge with minimal gassing or water loss.
EQUALIZATION Mode 14.4 Volts – Every 21 hours for a period of 15 minutes prevents battery stratification & sulfation – the leading cause of battery failure.
PD4500 Series Features
Reverse battery protection
Electronic current limiting
High and Low AC input protection
Intelligent, variable speed, cooling fan
Automatic thermal protection
Press open door for easy access to circuit breakers
Front access to large wiring compartment
Optional DC Ground Bus can be user
installed in the DC wiring compartment.
Covered by one or more of the following U.S. Patents: 6,424,520; RE39,461 and 7,782,002.
Inteli-Power AC Features
The AC Distribution Panel is rated for 240VAC at 50 Amps.
Provisions for up to 12 branch circuit breakers plus a center feed dual 50 Amp main breaker (not included).
90-Amp Inteli-Power Converter/Charger and AC/DC Distribution Panel
12 built-in push and lock strain relief wiring connectors make installation quick and easy and saves over 50% on installation costs.
Attractive lightweight panel design made from black impact-resistant high temperature polymers.
Inteli-Power DC Features*
Top two fuse holders recommended for low current devices such as smoke and carbon monoxide detectors.
Optional 12 branch fuse holders with 2-30 Amp circuits or 18 branch fuse holders with 4-30 Amp circuits. Maximum rating 20 Amps on remaining circuits – available with optional wire tail connections.
Optional L.E.D. indicators identify which fuse is blown.
Converter/Charger section is accessible from the front.
Converter/Charger ratings of 60, 75 & 90 Amps which is the largest rating available in the industry.
Easy access reverse battery protection fuses
