Description
Intellitec 100 AMP Smart Energy Management System Control Panel 00-00949-000 Model 1000
The 100 AMP SMART EMS Model is a centralized power switching, fusing and distribution center.
Power from the 120/240 volt power source is fed into the box. The potential of lethal electrical shock is
present in this box. Inadvertent shorts at this box could result in damage and/or injury. All servicing of this
box should be done by a qualified Service Technician
The consists of two elements: the and the The
Display Panel is mounted on a wall or suitable surface, remotely from the Distribution Panel and convenient to the user.
The Distribution Panel is a completely self-contained 120/240 volt power distribution and energy management system
intended to be used in recreational vehicles. The Distribution Panel is housed in a sheet metal enclosure with removable
front panel. It provides circuit protection for all the 120 VAC loads in the RV and a system of energy management to
minimize the over-loading and tripping of circuit breakers.
The Distribution Panel offers slots for eight single or dual, standard 120 volt circuit
breakers. Two of these breakers, located in the two center stab positions, must be 50 Amp units that act as a main input
protection for each of the lines supplying the remainder of the branch breakers (up to 12).
The automatically senses the available power to the vehicle. It determines
whether it is connected to a 120 VAC – 30 Amp shore power source, 240 VAC – 50 Amp shore power source, or generator
source. Depending upon available power, it controls the operation of 8 possible loads that may include the front and rear
air conditioner fan, compressor using low voltage switching, and other 120 Volt loads (such as the refrigerator, water
heater, washer/dryer, or other large appliances). These appliances may be any type load, but are typically heavier loads,
those whose use can be “postponed” until a time when current is available for their use
