Description
Intellitec Slideout Control Module 310 #00-00525-310
Intellitec’s Slide-Out Controller’s are a part of the expanding family of the MONOPLEX System. These controllers are designed to control the operation of a slide-out room electrical mechanism. The controller automatically stops the slide-out when it reaches it’s inner or outer limit by sensing the current drawn by the motor. This eliminiates the need for the owner to hold the switch in the “ON” position for the entire extend/retract cycle, or installation of the limit switches and associated wiring during installation. By utilizing MONOPLEX System switching, only one wire and a ground lead are needed to connect to multiple switches, each with it’s own indicator. The control unit can be mounted near the motor mechanism to ease installation and eliminate long heavy gauge wire runs. To operate the room, the owner would simply press the button. The indicator light will come on and the slide will move out. When the slide-out reaches it’s outer most limit, the unit will sense the rise in current and switch off the power to the slide-out motor and indicator light. To move the room back again, the owner will again push the button, the indicator will come on and the room will move in. When the slide-out reaches it’s inner most position, the controller will sense the rise in current and will shut off power to the motor and indicator light. If, at any time during the operation of the slide-out, the owner wants to stop the room, he can push the button and it will stop. Pressing the button again will start in the reverse direction.
- Slideout Room Control Module 310 will be used as a replacement for part # 31-0000336000 in future
- NOTE: If using as replacement for part #31-0000336000 you must buy a part #31-1100407000 harness.
- Use control switch part #31-0000183011 ONLY.
- Intellitec Slideout Control Module 310 #00-00525-310
- A slide out room controller w/ memory, lock and stop adjustment
- Approx 6.375″ W x 3.75″ H x 1.625″ D
- Wall mount
- Connects by two connectors (white in line monoplex type) one 6 pin one 2 pin
- NOTE: If you do not need memory lock, you can use part #31-0000277100, this unit does NOT have a memory lock to it.
| Specifications: | |
| Operating Voltage | 10 – 16 VDC |
| Current Range | 4 – 21 Amps |
| Current carry capabilities | |
| Continuous Current | 20 Amps |
| Stall Current Threshold | 20 – 50 Amps |
| Standby Draw | 2 milliamps |
| Operating Temperature | -40°C to +85°C -40°F to +185°F |
| Operating Environment | Protected from direct weather |
Warranty Terms: 1 Year
