Description
Power Max PMTS-30 AMP Transfer Switch
30AMP Transfer Switch
- Input Voltage: 120 VAC, 60Hz
- Input Current: 30A
- Voltage Output: 120 VAC, 60Hz
- Output Current: 30A
- Shore Power Input: YES
- Knockout Holes: 3
- Knockout Sizes: 2 @ 7/8” & 1 @ 1.0”
- Complies with FCC: YES
- ETL Listed: YES
- Timer Delay: YES
- Timer Bypass Switch: YES
- Dimensions: L: 8″ x W: 8″ x H: 5″
- Weight: 4.25 lbs
The Power Max PMTS-30 AMP Transfer Switch is for a 30 Amp AC service. It can be mounted in any
position, leaving enough room for the shoreline and generator wire connections. To minimize voltage drop across the wire, install the Power Max PMTS-30 AMP Transfer Switch as close to the generator and shore power cord entrance as possible.
When shore power is available, it is automatically connected to the Control Panel. To operate from an
onboard generator, start the generator and after 20 to 30 seconds power will automatically transfer from
shore power to generator. The time delay of 20 to 30 seconds allows the generator voltage to stabilize.
When the Generator stops, power automatically and immediately transfers back to shore power.
The PMTS-30 is rated for use on a circuit capable of momentarily delivering not more than: 3000 rms symmetrical Amps. 240 V AC Max operating voltage
Warranty Terms: 2 Years
